FETtec FC G4
The FETtec FC G4 features the latest STM32G4 processor. Providing unparalleled processing power to your aircraft. Along with an MPU6000 gyro, two 5v BECs, 6-27V (2-6S) power handling, and a host of other features, the G4 from FETtec is on the cutting edge of Flight Controller technology.
Features:
-
Latest STM32G4 Processor
-
170Mhz + Math accelerator
-
MPU6000
-
-
Supply voltage 6-27V (2S-6S Lipo)
-
2x dedicated onboard BEC (max. 600mA each)
-
5V BEC for RX
-
5V/16V BEC for VTX (switchable and real Pit*)
-
-
2x 8 pin connector for solder free ESC connection
-
Connector 1: ESC signal 1-4, telemetry, VCC, GND
-
Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
-
-
1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
-
real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
-
-
2x 6 pin connectors for serials
-
RX1, TX1, 3.3V, VCC, 5V, GND
-
RX3, VCS/TX3, RGB LED, VCC, 5V, GND
-
-
1x 4 pin connector for receiver
-
Signal, TLM, 5V, GND
-
-
5 UART serials
-
UART 1 free
-
UART 2 used for Receiver
-
UART 3 free
-
UART 4 used for onboard OSD, can be set free
-
UART 5 used for ESCs / TLM / Onewire
-
-
4 ESC solder pads (Signal/GND) in each corner
-
Buzzer pads
-
4 tiny RGB LEDs (selectable color)
-
Supported ESC protocols
-
PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
-
-
FETtec KISS firmware
-
Onboard OSD
-
Graphic OSD (STM32)
-
Full KISS Tuning
-
- Filter (PIDs, Rates, Settings)
- LED control (RGB LED, Racewire)
- VTX
- Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
- KISS GPS support + live map
- Custom graphic pilot logo
- Stick overlay
- Custom layout
- can be deactivated for usage of digital systems
-
Connector type: JST-SH-1mm
*real Pit-Mode: A power supply pin which is remotely switchable
Dimensions:
-
Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm
-
Mounting hole arrangement:
-
20 x 20mm with M2 mounting hole (expandable to M3)
-
30 x 30mm with M3 mounting hole
-
30 x 30mm mounting hole tips are removable to reduce overall FC size
-
-
Overall height: 7,9mm
-
Weight: 5,37g
Firmware:
- KISS Firmware
- FETtec OSD Firmware
Scope of delivery:
- 1x FETtec FC G4
- 1x 8 pin cable (open on one side)
- 1x 6 pin cable (open on one side)