Diatone Mamba Stack - MK4 F405 FC + 30A 3-6S BLHeli_S ESC - Mini 20x20

The Diatone Mamba MK4 Mini Stack features a 20x20 MK4 F405 Flight Controller and 30A ESC. With OSD and an MPU650 Gyro, this stack is the perfect addition to your FPV build.

MK4 UPDATES

• Upgraded the twisted pair anti-jamming cable, and the reinforcement process
• MINI series upgraded DJI interface and 5V 15W/9V 18W 2 set BEC
• Miniseries FC use 2mm and 3mm fixing holes
• The entire series supports 6 set uart and |2C
• A full range of integrated Flash and Baro
• MP9943 synchronous rectifier BEC
• The pad area increased by 30%
• Pad spacing increased by 100%
• The whole series uses Type-C
• 32Bit ESC all support 128K
• 4set power protection

• 16M Flash Memory Blackbox
• 20x20mm Mounting Pattern
• 3~6S Lipo (12.6~25.2V) Input
• MAMBA MINI MK4 F405 FC
• MAMBA MINI 30A ESC
• MPU6500 GYRO
• 6 Uarts
• Buzzer
• OSD

MAMBA MK4 F405 MINI FC

• Mounting: 20.0x20.0mm,M3/M2
• Receiver: TBS/SBUS/IBUS/DSM
• GYRO Version A: Gyro MPU500
• Size: 29.0x29.5x6.5mm
• Receiver Protection: Yes
• Blackbox: 16M Memory
• Frequency: 168MHz
• Software: Betaflight
• BEC Protection: Yes
• TVS Protection: Yes
• AIR UNIT Port: Yes
• ESC Signal: 6 Set
• MCU: STM32F405
• VTX Switch: Yes
• Buzzer Pad: Yes
• Barometer: Yes
• OSD: AT7456E
• CURR Pad: Yes
• BEC3.3V: 0.5A
• Input: 6S Lipo
• BEC 5V: 2.5A
• Weight: 6.02
• Uarts: 6 Set
• BEC 9V: 2A
• BF LED: Yes
• F.Port: Yes
• 12C: Yes

MAMBA 30A MINI ESC

• Input Voltage: 3~6S Lipo 12.6-25.2V
• Continuous Current: 30A×4
• Mounting Pattern: 20x20
• Protocol: Dshot300/600
• Burst Current: 40A
• BLHeli: BLHeli_S
• Target: CH40
• BEC: No

• 1x Diatone Mamba Stack - MK4 F405 FC + 30A 3-6S BLHeli_S ESC - Mini 20x20
• 5x M3 ESC Isolation Dampers
• 5x M2 ESC Isolation Dampers
• 5x M3 Silicone Dampers
• 5x M2 Silicone Dampers
• 1x 6-Pin Air Unit Cable
• 2x 8-Pin Cable